peer-stream.com

[blinertv]

hello again :>

BUT you need remeber this is a full P2P solution no server
so if your p2p swarm have enouch upload you can stream to >100.000 users at same time
und stable....

if u tallking for full p2p ... why use dat server if dmca is 101%?
for full p2p and 200.000+ users at same time i can use sopcast or streamtorrent(as I use it sometimes)

friendly

[whitewindow]

if u tallking for full p2p ... why use dat server if dmca is 101%?
for full p2p and 200.000+ users at same time i can use sopcast or streamtorrent(as I use it sometimes)

friendly

the user does not need install any software

[blinertv]

the user does not need install any software

... and the streamers have tired create channels due to copyright infringement

[FootyLive]

Just gave this a go - It cut off a small section from the top of the screen and bottom - anyway to fix this ?

I'd have prob been able to sort this with FME

[whitewindow]

Just gave this a go - It cut off a small section from the top of the screen and bottom - anyway to fix this ?

I'd have prob been able to sort this with FME

try change the resolution to fit your needs

your input resolution should be the same as it shown in the info tab
like Video width: 424 Video Height: 239

[actonbhoyrob]

Can u not offer the coice like jtv and ustream of using there broadcaster or dl ur fme config file so u can stream on it from fme i quite like the idea p2p flash but im used to fme and would happily use if had fme to use with...

[DSTV]

Guys this works fine for me. The web broadcaster looks similar to FME so easy to use. Play with the size width and height to make it fit.

[actonbhoyrob]

I have tried every size theres none that fits coreect...

[pbogdanovic]

I have two problems:

- Most of the time the broadcast doesn't start from Firefox. I click broadcast and there is no stream in the viewer ("Channel not online"). I need to try like 20 times before it starts.

- For whatever reason input size always seem to be 320x240, although my ManyCam is set to 800x600?

If you could solve these problems this stuff would be phenomenal. I prefer simple p2p for scalability and there is no server overload, drops, cuts and problems.

[whitewindow]

I have tried every size theres none that fits coreect...

hello

what is you input hight and width? resolution?

[whitewindow]

I have two problems:

- Most of the time the broadcast doesn't start from Firefox. I click broadcast and there is no stream in the viewer ("Channel not online"). I need to try like 20 times before it starts.

- For whatever reason input size always seem to be 320x240, although my ManyCam is set to 800x600?

If you could solve these problems this stuff would be phenomenal. I prefer simple p2p for scalability and there is no server overload, drops, cuts and problems.

hello

thank you to test peer-stream

hmm i cannot repoduce this problem maybe you open peer-stream.com with www.peer-stream.com ? or the broadcaster link ? try without www

test with camera resultion 1024x768 in the broadcaster
the broadcaster should use the next fitting 4:3 resolution
please test this

[whitewindow]

I have tried every size theres none that fits coreect...

you see this in the video window from the broadcaster or in the player too?

[pbogdanovic]

Is there any way to view the current number of viewers?

[whitewindow]

Is there any way to view the current number of viewers?

yes you see this in the info tab
Neighbors (count/estimated): 10 / 100

first number is the count you direct connected and second are all users for this channel

[actonbhoyrob]

hello

what is you input hight and width? resolution?

onsite is 700 width 400 hight..

when i use fme my settings... input 640x480 - output 640x364

[whitewindow]

onsite is 700 width 400 hight..

when i use fme my settings... input 640x480 - output 640x364

ok lets try

select 640x480 in the broadcaster (Camera resultion) press broadcast
in the Info log you should see the video Height and video Width what falues are shown for this?

[actonbhoyrob]

ok lets try

select 640x480 in the broadcaster (Camera resultion) press broadcast
in the Info log you should see the video Height and video Width what falues are shown for this?

i cant check atm streaming atm soon as finnished ill test again and i can give more info

[whitewindow]

I have two problems:

- Most of the time the broadcast doesn't start from Firefox. I click broadcast and there is no stream in the viewer ("Channel not online"). I need to try like 20 times before it starts.

- For whatever reason input size always seem to be 320x240, although my ManyCam is set to 800x600?

If you could solve these problems this stuff would be phenomenal. I prefer simple p2p for scalability and there is no server overload, drops, cuts and problems.

hello again
please can you clear your cache and try again with firefox i hope i fixed it
if not please can you open firebug and look to the network tab what connections are done

[pbogdanovic]

We've had a huge event last night and streaming was fine! Now if we could just increase the initial quality somehow...

Do you plan on adding some advertising, possibly a revenue share with your ads? This way you could earn a % from broadcasters and you would also give broadcasters the incentive to stream and get paid.

[whitewindow]

We've had a huge event last night and streaming was fine! Now if we could just increase the initial quality somehow...

Do you plan on adding some advertising, possibly a revenue share with your ads? This way you could earn a % from broadcasters and you would also give broadcasters the incentive to stream and get paid.

hello

yes this is planed in the near future

anyway is the firefox "Channel not online" Problem solved? please confirm